Committed To Quality, Committed To You


Success Story: Fresh Slip Slurry


A solution from Galaxy Sivtek by providing Special Design Machine for filtering fresh Slip Slurry.

Requirement & Challenges

A Reputed Customer of Bathroom Products (Sanitary ware) manufacturer was using round vibratory machine from local make for the screening. They were facing the problem of mesh clogging, loosening and frequent tearing of mesh. Due to these problems they were not getting desired production capacity and they were looking for the optimum solution for the same.



Once salesperson of Galaxy Sivtek approached them for the introduction of the SIVTEK Vibro separator to this customer. They explained the above-mentioned problem to him and asked for a solution. He requested the customer to provide a 100-liter slurry to take the trial in a trial house at Galaxy SIVTEK Plant. The customer provided the sample and the trial was done at the test house. It was found that GS-48 with 80# can fulfill customer requirements with the required process rate. A trial video was provided to the customer for their assurance. Based on the results seen in the trial video, the customer decided to purchase two machines, one each for fresh slip slurry and clay slurry separation.


On installing these two machines, customers observed the obvious difference in the performance of SIVTEK Vibro against their local make Vibro machines. They were getting double throughput per machine with better efficiency. Mesh Life also doubled compared to earlier products. A customer got value for their money. Based on the successful running of these machines, the customer purchased two more units and they are planning to replace all existing local make machines in a phased manner with SIVTEK Vibro Separators from Galaxy Sivtek. On recommendation from this customer, their second plant also procured similarly
machines from Galaxy Sivtek and is enjoying the benefit of it.


    Chat on WhatsApp